Shear bond strength of a bulk-fill resin composite to dentin using four adhesive protocols: an in-vitro study
- 1The main conclusion is not supported: the "best adhesive" is not better than the control (A vs C, p = 0.925).
- 2A key mean in Table 4.2 cannot be computed from your raw data (12.58 reported, 15.28 recalculated).
- 3Methods say 10 specimens per group; your sheets hold 9.
Major comments in order of impact
Minor comments
Statistics: what changes and why
| ITEM | AS WRITTEN | becomes | CHANGE TO | WHY |
|---|---|---|---|---|
| Conclusion, C vs A | → | C comparable to A | Tukey A vs C: difference 0.64 MPa, p = 0.925. A has the higher mean. | |
| Group B mean | → | 15.28 MPa | Mean of the 9 raw values. The typed value has the same digits in a different order. | |
| Specimens per group | → | n = 9 | The sheets hold 9 per group. F(3, 32) also only fits 36 specimens. | |
| Group D spread | → | SD 2.46 (SE 0.82) | 0.82 equals the SD divided by √9: that is the standard error. | |
| Assumption checks | → | Report them | Shapiro–Wilk lowest p = 0.395; Levene p = 0.647. Both pass. | |
| One-way ANOVA | F(3, 32) = 24.21 | = | Keep | Recomputed from the raw data: F = 24.21, p < 0.001. |
Recomputed means from the raw sheets (MPa, n = 9 per group, line = ± 1 SD)
Recomputed Tukey comparisons
Originality: copied text and AI-sounding writing
Section-by-section critique
| SECTION | WHAT WORKS | WHAT TO CHANGE |
|---|---|---|
| Title and abstract | The title names the material, the test and the comparison. | CRITICAL The abstract repeats the unsupported conclusion (M1) and the wrong group B mean (M2). |
| Introduction | The gap is clear: few studies pair universal adhesive modes with a bulk-fill composite. | State the null hypothesis for each comparison, not one general aim. |
| Methods | Adhesive protocols and ageing (5,000 thermocycles) are described step by step. | Correct n to 9, add an exclusion log, a sample-size justification and the assumption checks. |
| Results | The ANOVA is reported in full: F(3, 32) = 24.21. | CRITICAL Correct Table 4.2 and remove the claim that C is above A. |
| Discussion | Compares the findings with earlier bond strength studies. | Rebuild the argument on "comparable to the control"; drop the equivalence cited to [14]. Rewrite paragraphs 2 and 5 (section 5). |
| Conclusion | Short and direct. | Rewrite it to match the data: A and C are statistically the same; D is lowest. |
Ethics and compliance
Tables and figures
References
Plain explanation for the student
Your experiment is good and your main test is right. But your conclusion picks the wrong winner: the control bonded best, and the universal adhesive in etch-and-rinse mode was statistically the same. "Comparable to the gold standard" is a strong, defensible finding. Claiming it is better is what an examiner will stop you on.
The other two problems are typing problems, not science problems: one mean has its digits in the wrong order, and the methods count one more specimen per group than your sheets hold. Both are quick to fix, but an examiner who finds them will check every other number.
Must-fix before the defense, in order
- 1Rewrite the conclusion: C is comparable to A, not superior.
- 2Correct the group B mean to 15.28 in Table 4.2 and the abstract.
- 3State n = 9 per group and report the excluded specimens.
- 4Report the group D SD as 2.46.
- 5Add the normality and equal-variance results.
- 6Replace or reword the sentence cited to [14]; correct the details of [22].
- 7Quote or rewrite the two Discussion sentences that follow [7], and rewrite the passages that read as machine-written.
Evidence index nothing here is opinion without a check behind it
| ID | WHAT WAS CHECKED | USED IN |
|---|---|---|
| INV-1 | Specimen inventory: 9 per group on the raw sheets, 36 in total, no exclusion log. | M3 |
| D02 | Group B mean recomputed from the 9 raw values: 15.28. | M2 |
| H1 | Origin of 12.58: the same digits as 15.28, two swapped. | M2 |
| D03 | Group D spread recomputed: SD 2.46, SE 0.82. | Minor |
| A01 | Normality and equal-variance checks on the raw data: lowest Shapiro–Wilk p = 0.395, Levene p = 0.647. | Minor |
| T04 | Tukey A vs C recomputed: difference 0.64 MPa, p = 0.925. | M1 |
| T11 | Reference [14] read against its sentence. | Minor |
| T12 | Reference [22] checked against its DOI record. | Minor |
| T15 | Thesis text compared with the cited sources: two sentences follow [7] without quotation marks. | Originality |
| T16 | Writing read for passages that sound machine-written: two flagged, with reasons. | Originality |
Recomputed descriptives (MPa, from the raw sheets)
| GROUP | N | MEAN | SD | SE | MIN | MAX |
|---|---|---|---|---|---|---|
| A · Two-step etch-and-rinse adhesive (control) | 9 | 18.97 | 1.45 | 0.48 | 16.60 | 20.80 |
| B · Universal adhesive, self-etch mode | 9 | 15.28 | 2.43 | 0.81 | 10.32 | 18.75 |
| C · Universal adhesive, etch-and-rinse mode | 9 | 18.33 | 2.28 | 0.76 | 14.29 | 20.97 |
| D · One-step self-etch adhesive | 9 | 11.08 | 2.46 | 0.82 | 7.65 | 15.08 |